For the same category oscilloscopes, only MDO-2000E provides spectrum analysis function. Via the built-in arbitrary
waveform generator, users can observe AM, FM, FSK and Linear Frequency Sweep spectrum analysis demonstrations.
The demonstrated software collocating with the built-in arbitrary waveform generator provides a tool for preliminary
spectrum analyzer users or educational courses to better understand the operation of spectrum analyzer as well as to learn
and show how spectrum analyzer clearly displays frequency domain signals.
Demonstration procedures are as follows:
|
First of all, connect oscilloscope’s channel one |
|
|
Press APP>demo>F1> SA sequentially on the oscilloscope |
|
|
1. Select SA mode 1 and RUN, the screen will display AM |
|
||
|
2. Press APP>demo> to select SA mode 2 and RUN. |
|
||
|
This carrier waveform of FM is sine 15MHz, 500mVpp; |
|
||
|
3. Select SA mode 3 and RUN, the screen will display |
|
||
|
This FSK’s carrier waveform is sine 10MHz, 500mVpp; |
|
||
|
4. Select SA mode 4 and RUN, the screen will display linear |
|
||
|
This carrier waveform is sine 500mVpp; linear frequency |
|
||
With the above 4 signal demonstrations we can clearly understand the frequency domain analysis capability of MDO-2000E.
MDO-2000E standardly provides a 25MHz AWG, which can be collocated with this demo APP to allow beginners to quickly
learn and show the operation of spectrum analyzer without preparing other signal generators or DUTs. Settings include start,
stop, span frequency, spectrum traces, and RBW etc.
MDO-2000E, the only oscilloscope of the same category, provides the spectrum analysis function. MDO-2000E, with dual
domain analysis capability, is ideal for educational courses and the applications of low frequency domain analysis.
For Product Information Click Here
For the above demonstration video :
