GW Instek launches the brand new MFG-2000 series multi-channel function generator, including MFG-21XX entry-level models and MFG-22XX advanced models. The output channels of MFG-21XX models include one single-channel 10M/20M/30M/60MHz ARB generator ; one 25MHz pulse generator ; one 160MHz or 320MHz RF signal generator (MFG-2160MF/MFG-2160MR) and one power amplifier (MFG-2120MA only)；MFG-22XX models include one 30MHz/60MHz dual performance ARB generator ; one 25MHzpulse generator ; one 160MHz or 320MHz RF signal generator (MFG-2260MFA/MFG-2260MRA) ; and one power amplifier (MFG-2260MFA/MFG-2260MRA only).
Ordering Info :
|
MFG-2110 |
MFG-2120 |
MFG-2120MA |
MFG-2130M |
MFG-2160MF |
| MFG-2160MR 60MHz Single channel Arbitrary Function Generator with pulse generator, modulation, 320MHz RF signal generator |
MFG-2230M 30MHz Dual channel Arbitrary Function Generator with pulse generator, modulation |
MFG-2260M 60MHz Dual channel Arbitrary Function Generator with pulse generator, modulation |
MFG-2260MFA 60MHz Dual channel Arbitrary Function Generator with pulse generator, modulation, 160MHz RF signal generator, power amplifier |
MFG-2260MRA 60MHz Dual channel Arbitrary Function Generator with pulse generator, modulation, 320MHz RF signal generator, power amplifier |
MFG-2000 series, which has up to 5 simultaneous output channels (MFG-2260MFA/MFG-2260MRA), including CH1 and CH2 equivalent performance dual channel arbitrary function generator with the maximum 60MHz for both channels; RF signal generator, a standard AFG, which produces the maximum 320MHz sine wave and various modulation RF signals; pulse generator, whose frequency reaches 25MHz; power amplifier, which is ideal for audio range. The above-mentioned five different functionality channels are separately or totally allocated on 10 models, which extend from the basic single-channel AFG with pulse generator models to five-channel models so as to satisfy various educational and industrial applications.
The AFG channel of the MFG-2000 series outputs sine, square, and triangle, etc. The series features true point-by-point output arbitrary waveform characteristics of 200 MHz sample rate, 100MHz waveform repetition rate, 14 bit resolution, and 16k point memory depth. Some models provide various modulation methods such as AM/FM/PM/FSK/PWM, Sweep, Burst, Trigger, 150MHz Frequency Counter. Synchronized dual channel models provide correlated functions, including synchronization, delay, sum, and coupling. RF signal generator, a complete AFG signal source (including ARB), features various modulations, Sweep, and digital modulations such as ASK and PSK and its sine wave frequency is up to 320MHz. A full-function pulse generator with 25 MHz is equipped to all models and its pulse width, rise edge time, fall edge time are adjustable that can be applied as trigger signals. Independent input/output power amplifier with 20W, 10dB, 5Hz-100kHz bandwidth, and distortion less than 0.1% can be applied to the audio application.
|
Isolated Channel Design |
The overall design of the MFG-2000 series is earth ground isolation among output/input terminals and instrument chassis that can only be found in high-level signal sources. The output channels can sustain maximum isolation voltage up to ±42Vpk (DC+ AC peak value) to earth ground that is ideal for floating circuit tests. Multi-unit outputs can be executed without factoring in grounding reference issue. There is no additional isolation requirement for experiments such as “full-wave rectification” and “voltage doubler” which are easy and safe. An external power supply can bring up the DC bias voltage to ±42Vpk to meet the requirements of higher DC bias voltage such as automotive and educational applications.
|
|
Arbitrary Waveform Editing Software |
The AFG of the MFG-2000 series collocating with AWES (Arbitrary Waveform Editing Software) allows users to easily and quickly edit arbitrary waveforms. DWR (Direct Waveform Reconstruction) allows users to collocate with GDS series digital oscilloscopes to retrieve waveforms and upload them to arbitrary generator to achieve direct waveform reconstruction. 66 built-in waveforms allow users to edit arbitrary waveforms and to output the whole segment or divided segments.
|
|
Satisfied various application |
With the multi-functionality channels, the MFG-2000 series provides different industrial sectors with special dual channel waveforms, IQ modulation signals, low-frequency vibration simulation, automotive sensors, AM/FM broadcast signals, PWM motor or fan control signals, pulse synchronized signals, pulse noise, audio circuit or devices such as speaker tests. The series is ideal for various fields, including scientific research, education, research and development, production and quality control. |
Product model selection
The entire MFG-2000 series has 10 models. The specific functions for each model are as follows:
|
MFG-2000 series specific functions |
||||||
|
|
CH1 |
CH2 |
25MHz Pulse Generator |
RF Generator |
Power Amplifier |
Modulation/Sweep |
|
Function With ARB |
Function With ARB |
|||||
|
MFG-2110 |
●10MHZ |
|
● |
|
|
|
|
MFG-2120 |
●20MHZ |
|
● |
|
|
|
|
MFG-2120MA |
●20MHZ |
|
● |
|
● |
● |
|
MFG-2130M |
●30MHZ |
|
● |
|
|
● |
|
MFG-2160MF |
●60MHZ |
|
● |
●160MHZ |
|
● |
|
MFG-2160MR |
●60MHZ |
|
● |
●320MHZ |
|
● |
|
MFG-2230M |
●30MHZ |
●30MHZ |
● |
|
|
● |
|
MFG-2260M |
●60MHZ |
●60MHZ |
● |
|
|
● |
|
MFG-2260MFA |
●60MHZ |
●60MHZ |
● |
●160MHZ |
● |
● |
|
MFG-2260MRA |
●60MHZ |
●60MHZ |
● |
●320MHZ |
● |
● |
The MFG-2000 series can maximally and simultaneously output five functional channels. The functionalities of each channel are as follows:
|
Channel 1 |
1uHz-60MHz |
AM ,FM ,PM,FSK |
|
|
Channel 2 |
|
||
|
RF |
1uHz-320MHz |
ASK,PSK |
|
|
Pulse |
25MHz Full Function pulse Generator |
||
|
Power |
20W Power Amplifier |
||
Detail of MFG-2000 Specifications.
|
CH1/ CH2 |
|
||||||||||||||
|
Arbitrary Functions |
|
|
|
||||||||||||
|
|
ARB function |
Built-in |
|||||||||||||
|
|
Sample Rate |
200 MSa/s |
|||||||||||||
|
|
Repetition Rate |
100MHz |
|||||||||||||
|
|
Waveform Length |
16k points |
|||||||||||||
|
|
Amplitude Resolution |
14 bits |
|||||||||||||
|
|
Non-Volatile Memory |
10sets 16k points(1) |
|||||||||||||
|
|
User-defined output section |
From point 2~16384 |
|||||||||||||
|
|
User-defined output marker section |
From point 2 ~ 16384 |
|||||||||||||
|
|
Output mode |
1~1048575 cycles or infinite mode |
|||||||||||||
|
Frequency Characteristics |
|
|
|
||||||||||||
|
|
Range |
Sine |
60MHz(max) |
||||||||||||
|
|
|
Square |
25MHz(max) |
||||||||||||
|
|
|
Triangle, Ramp |
1MHz |
||||||||||||
|
|
Resolution |
|
1μHz |
||||||||||||
|
|
AccuracyStability |
±20 ppm |
|||||||||||||
|
|
Aging |
±1 ppm, per 1 year |
|||||||||||||
|
|
Tolerance |
≤1μHz |
|||||||||||||
|
Output Characteristics(2) |
|
|
|
||||||||||||
|
|
AmplitudeRange |
1mVpp to 10 Vpp (into 50Ω) 2mVpp to 20 Vpp (open-circuit) |
|||||||||||||
|
|
Accuracy |
±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset)) |
|||||||||||||
|
|
Resolution |
0.1mV or 4 digits |
|||||||||||||
|
|
Flatness |
± 1% (0.1dB) ≦1MHz ± 3% (0.3dB) ≦50 MHz ± 10% (0.9dB) ≦160MHz ± 30% (3dB) ≦320MHz (sinewave relative to 1 kHz/into 50Ω) |
|||||||||||||
|
|
Units |
Vpp, Vrms, dBm |
|||||||||||||
|
Offset |
Range |
±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit) |
|||||||||||||
|
|
Accuracy |
1% of setting + 5mV+ 0.5% of amplitude |
|||||||||||||
|
Waveform Output |
Impedance |
50Ω typical (fixed) > 10MΩ (output disabled) |
|||||||||||||
|
|
Protection |
Short-circuit protected Overload relay automatically disables main output |
|||||||||||||
|
|
Ground Isolation |
42Vpk max |
|||||||||||||
|
Sync Output |
Range |
TTL-compatible into>1kΩ |
|||||||||||||
|
|
Impedance |
50Ω standard |
|||||||||||||
|
|
Ground Isolation |
42Vpk max |
|||||||||||||
|
Sine wave Characteristics(3) |
|
|
|||||||||||||
|
|
Harmonic distortion |
–60 dBc DC～200kHz, Ampl>0.1 Vpp –55 dBc 200kHz～1 MHz, Ampl>0.1 Vpp –45 dBc 1MHz～10 MHz, Ampl＞0.1Vpp –30 dBc 10MHz～320MHz, Ampl＞0.1Vpp |
|||||||||||||
|
|
Total harmonic distortion |
< 0.1% (Ampl>1Vpp)DC~100 kHz |
|||||||||||||
|
Square wave Characteristics |
|
|
|||||||||||||
|
|
Rise/Fall Time |
<15ns |
|||||||||||||
|
|
Overshoot |
<5% |
|||||||||||||
|
|
Asymmetry |
1% of period +5 ns |
|||||||||||||
|
|
Variable duty Cycle |
0.01% to 99.99%(limited by the current frequency setting) |
|||||||||||||
|
|
Jitter |
20ppm+500ps(4) |
|||||||||||||
|
Ramp Characteristics |
|
|
|
||||||||||||
|
|
Linearity |
< 0.1% of peak output |
|||||||||||||
|
|
Variable Symmetry |
0% to 100% |
|||||||||||||
|
Pulse Characteristics |
|
|
|||||||||||||
|
|
Frequency |
1uHz~25MHz |
|||||||||||||
|
|
Pulse Width |
≧20nS(limited by the current frequency setting) |
|||||||||||||
|
|
Variable duty Cycle |
0.01%~99.99%(limited by the current frequency setting) |
|||||||||||||
|
|
Overshoot |
<5% |
|||||||||||||
|
|
Jitter |
20ppm +500ps(4) |
|||||||||||||
|
Pulse Generator |
|
|
|||||||||||||
|
|
Amplitude |
1mVpp to 2.5 Vpp (into 50Ω) 2mVpp to 5 Vpp (open-circuit) |
|||||||||||||
|
|
Offset |
±1 Vpk ac +dc (into 50Ω) ±2Vpk ac +dc (Open circuit) |
|||||||||||||
|
|
Frequency |
1uHz~25MHz |
|||||||||||||
|
|
Pulse Width |
20nS~999.9ks(limited by the current frequency setting) |
|||||||||||||
|
|
Variable duty Cycle |
0.01%~99.99%(limited by the current frequency setting) |
|||||||||||||
|
|
Leading and Trailing Edge Time(5) |
10nS~20S(1ns resolution) (limited by the current frequency and pulse width settings) |
|||||||||||||
|
|
Overshoot |
<5% |
|||||||||||||
|
|
Jitter |
100ppm +500ps(4) |
|||||||||||||
|
RF Generator |
|
|
|||||||||||||
|
Arbitrary Functions |
|
|
|
||||||||||||
|
|
ARB function |
Built-in |
|||||||||||||
|
|
Sample Rate |
200 MSa/s |
|||||||||||||
|
|
Repetition Rate |
100MHz |
|||||||||||||
|
|
Waveform Length |
16k points |
|||||||||||||
|
|
Amplitude Resolution |
14 bits |
|||||||||||||
|
|
User-defined output section |
From point 2~16384 (optional) |
|||||||||||||
|
|
Jitter |
20ppm +5ns |
|||||||||||||
|
Frequency Characteristics |
|
|
|
||||||||||||
|
|
Range |
Sine |
|
||||||||||||
|
|
|
Square |
25MHz(max) |
||||||||||||
|
|
|
Triangle, Ramp |
1MHz |
||||||||||||
|
|
Resolution |
|
1μHz |
||||||||||||
|
|
AccuracyStability |
±20 ppm |
|||||||||||||
|
|
Aging |
±1 ppm, per 1 year |
|||||||||||||
|
|
Tolerance |
≤1μHz |
|||||||||||||
|
Output Characteristics(2) |
|
|
|
||||||||||||
|
|
Amplitude(into 50Ω) |
1mVpp to 2 Vpp (MFG-2XXXMF) 1mVpp to 1 Vpp (MFG-2XXXMR) |
|||||||||||||
|
|
Accuracy |
±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset)) |
|||||||||||||
|
|
Resolution |
0.1mV or 4 digits |
|||||||||||||
|
|
Flatness |
± 1% (0.1dB) ≦1MHz ± 3% (0.3dB) ≦50 MHz ± 10% (0.9dB) ≦160MHz ± 30% (3dB) ≦320MHz (sinewave relative to 1 kHz/into 50Ω) |
|||||||||||||
|
Offset |
|
±1 Vpk ac +dc (into 50Ω) ±2Vpk ac +dc (Open circuit) |
|||||||||||||
|
Waveform Output |
Impedance |
50Ω typical (fixed) > 10MΩ (output disabled) |
|||||||||||||
|
Sine wave Characteristics(3) |
|
|
|||||||||||||
|
|
Harmonic distortion |
–60 dBc DC～200kHz, Ampl>0.1 Vpp –55 dBc 200kHz～1 MHz, Ampl>0.1 Vpp –45 dBc 1MHz～10 MHz, Ampl＞0.1Vpp –30 dBc 10MHz～320MHz, Ampl＞0.1Vpp |
|||||||||||||
|
|
Total harmonic distortion |
< 0.1% (Ampl>1Vpp)DC~100 kHz |
|||||||||||||
|
Square wave Characteristics |
|
|
|||||||||||||
|
|
Rise/Fall Time |
<15ns |
|||||||||||||
|
|
Overshoot |
<5% |
|||||||||||||
|
|
Asymmetry |
1% of period +5 ns |
|||||||||||||
|
|
Variable duty Cycle |
0.01% to 99.99%(limited by the current frequency setting) |
|||||||||||||
|
|
Jitter |
20ppm+500ps(4) |
|||||||||||||
|
Ramp Characteristics |
|
|
|
||||||||||||
|
|
Linearity |
< 0.1% of peak output |
|||||||||||||
|
|
Variable Symmetry |
0% to 100% |
|||||||||||||
|
Modulati0n/Sweep |
|
|
|||||||||||||
|
|
Modulation Type |
AM,FM,PM,FSK,PWM (The detail same as CH1 modulation specification) |
|||||||||||||
|
|
Sweep type |
Frequency |
|||||||||||||
|
|
Source |
INT/EXT（INT only for AM,FM,PM, PWM) |
|||||||||||||
|
PSK |
|
|
|||||||||||||
|
|
Carrier Waveforms |
Sine, Square, Triangle, Ramp, Pulse |
|||||||||||||
|
|
Modulating Waveforms |
50% duty cycle square |
|||||||||||||
|
|
Internal Frequency |
2mHz to 1 MHz |
|||||||||||||
|
|
Phase Range |
0∘~360.0∘ |
|||||||||||||
|
|
Source |
Internal / External |
|||||||||||||
|
ASK |
|
|
|||||||||||||
|
|
Carrier Waveforms |
Sine, Square, Triangle, Ramp, Pulse |
|||||||||||||
|
|
Modulating Waveforms |
50% duty cycle square |
|||||||||||||
|
|
Internal Frequency |
2mHz to 1 MHz |
|||||||||||||
|
|
AmplitudeRange |
0%~100.0% |
|||||||||||||
|
|
Source |
Internal / External |
|||||||||||||
|
Power Amplifier |
|
|
|||||||||||||
|
|
Input Impedance |
10KΩ |
|||||||||||||
|
|
Input voltage |
1.25Vpmax |
|||||||||||||
|
|
Working Mode |
Constant Voltage |
|||||||||||||
|
|
Gain |
20dB |
|||||||||||||
|
|
Output Power （RL=8Ω） |
20W(Square） |
|||||||||||||
|
|
Output Voltage |
||||||||||||||
