Ordering Info :
|
Radiation EMI testing package |
Conduction EMI testing package |
Conduction and radiation EMI testing package |
Radiation EMS testing package |
implify the complicated EMC measurement and debugging!
The continuous integration and complication of consumer electronics have produced numerous electromagnetic radiation sources. EMC tests can ensure various electronics products’ safety and effectiveness. In order to reduce the development cost and shorten development time, more and more companies are now focusing on EMC planning at the preliminary design phase. In addition to sending products to the lab, they are also looking for or try to establish an EMC solution which is cost effective and test effective diagnosis method.
GW Instek introduces the latest and comprehensive EMC pre-compliance testing solution to meet customers’ requirements of EMC conduction and radiation testing during product development and verification stages. The EMC pre-compliance testing mode is ideal for electronics product development. With this solution, users can resolve problems at the earliest phase to avoid reconfiguration once the product development was finalized. Reducing product development cycles and verification laboratory fees are conducive to expediting the process of product verification and launch time.
For different test categories, GW Instek provides different test packages,
| Radiation EMI testing package |
|
| Conduction and radiation EMI testing package |
|
| Conduction EMI testing package |
|
| Radiation EMS testing package |
|
|
GSP-9330 specifications |
|||
|
Please check from GSP-9330 page. |
|
GKT-008 specifications |
|||
|
PR-01 |
PR-02 |
||
|
Frequency Range |
150 kHz to 30 MHz |
Frequency Range |
30MHz to 3GHz |
|
Insertion Loss S21 / Frequency Response |
5 dB / -3.6 dB (Avg.) |
Insertion Loss S21 / Frequency Response |
10 dB / -13.5 dB (Avg.) |
|
Deviation of Insertion Loss |
±1 dB |
Deviation of Insertion Loss |
±3 dB |
|
Connector |
50 Ω (SMA) |
Connector |
50 Ω (SMA) |
|
Input Resistance |
10 MΩ |
Input Resistance |
1 MΩ |
|
Rated Voltage |
300 VAC |
Rated Voltage |
50 VDC |
|
ANT-04 |
ANT-05 |
||
|
Frequency Range |
30 MHz to 3 GHz |
Frequency Range |
30MHz to 3GHz |
|
Correction Factor / Frequency Response |
10 dB / -26.5 dB (Avg.) |
Correction Factor / Frequency Response |
10 dB / -26.5 dB (Avg.) |
|
Deviation of Correction Factor |
±4 dB |
Deviation of Correction Factor |
±4 dB |
|
Connector |
50 Ω (SMA ) |
Connector |
50 Ω (SMA) |
|
Maximum Input Power |
0.5 W |
Maximum Input Power |
0.5 W |
|
GLN-5040A Two-Line V-Network specifications |
||||
|
Frequency Range |
9kHz to 30MHz |
|||
|
Circuit Type |
(50uH + 5Ω) // 50 Ω, V type |
|||
|
Test Circuit Phase Number |
Single phase |
|||
|
AC Voltage Range |
0 ~ 240V AC + 10% |
|||
|
AC Frequency Range |
50 ~ 60 Hz ±5% |
|||
|
DC Voltage Range |
0 ~ 50V DC |
|||
|
Maximum Permitted Current (Continuous) Country-Specific Connector Models Refer to Figure 1 |
Model 1 |
Model 2 |
Model 3 |
Model 4 |
|
Germany |
United Kingdom |
China/Australia |
USA/Japan |
|
|
16A |
13A |
10A |
15A |
|
|
High Pass Filter (Alternative) |
150 kHz |
|||
|
Voltage Division Factor between EUT and Measuring Receiver Port |
10 dB |
|||
|
Response Threshold of Built-In Pulse Limiter |
130 dBuV |
|||
|
RF Output |
BNC (F) / 50Ω |
|||
|
Artificial Hand Function |
Embodied |
|||
|
EUT power supply Interface |
German Standard Power Supply Socket |
|||
|
Operating Temperature |
5 ∘C to 45∘ C |
|||
|
Storage Temperature |
-40 ∘C to 70∘ C |
|||
|
Dimensions / Weight |
338mm (L) x 237mm (W) x 133mm (H) / 4.2 Kg |
|||
|
Certification |
EN61010-1:2010; EN61326-1:2013; EN61000-3-2:2014 EN61000-3-3:2013 |
|||
|
GIT-5060 specifications |
|
|
Capacity |
900VA |
|
Maximum Voltage |
250V |
|
Maximum Current |
4A |
|
Input Voltage Frequency |
50~60Hz |
|
Air Switch Current Limiting Threshold Value |
5A |
|
EUT Power Supply Connector |
Universal Standard Power Socket |
|
Operating Temperature |
-15 ∘C ~ 45∘ C |
|
Storage Temperature |
-40 ∘C ~ 70∘ C |
|
Dimensions / Weight |
338mm(L) x 237mm(W) x 133mm(H) / 11.5 Kg |
|
Certification |
EN61010-1:2010 |
|
GPL-5010規格specifications |
||
|
Frequency Range |
9kHz to 200MHz |
|
|
Threshold Value Limit |
50mW (17 dBm) |
|
|
Input / Output Impedance |
50Ω |
|
|
Input Connector |
BNC (F) |
|
|
Output Connector |
N-type (M) |
|
|
Maximum Input Range |
Continuous Power : 2.5W (34dBm) |
|
|
Pulse Power : 10 kW (10us) |
||
|
DC Voltage : ±12V |
||
|
Insertion Loss
|
< 2 kHz |
> 30 dB |
|
9kHz to 50MHz |
10dB±0.5dB |
|
|
50MHz to 200MHz |
9.5dB ~ 12.2dB |
|
|
<6 kHz , >400MHz |
> 13dB |
|
|
Operating Temperature |
0 ∘C to 55∘ C |
|
|
Storage Temperature |
-40 ∘C to 80∘C |
|
|
Dimensions / Weight |
18mm(L) x 44mm(W) x 23mm(H) / 92 g |
|
|
Certification |
EN61010-1:2010 |
|
