The KL-800A CAN BUS Autotronic Training System is a distributed control system supported by advanced serial bus system CAN (Controller Area Network). CAN is a multi-master bus with an open, linear structure with one bus line and equal nodes. The number of nodes is not limited by the protocol. 

    Each module of KL-800A system is an ECU or the interoperable device (node) on CAN BUS. Data transfer between modules is achieved by the micro - controllers over CAN BUS. When signals and data are sent to a personal computer, the computer monitoring system displays the current status and data of module on PC screen and turns on the warning light if something is wrong. 

    The KL-800A system can simulate the operation of fuel injection system, ignition system and exhaust gas control. Experiments include the characteristics and operation of various sensors and actuators used in automobiles.