AFG-2225 is the first basic level dual-channel arbitrary function generator, which provides superior features in its class. Both channels are equipped with same characteristics to fit dual-signal applications such as differential or IQ signaling. The outstanding cost-performance value makes the AFG-2225 a practical instrument to accelerate the development process.
The major features for both channels include 10Vpp output amplitude; 25MHz frequency bandwidth with 1uHz resolution; built-in waveforms of Sine, Square, Ramp (Triangle) and Noise. As to the 1%~99% adjustable duty cycle of Square waveform can be used as pulse signal sources. For the arbitrary waveform, user can edit the 66 built-in waveforms or create a whole new one. Moreover, AFG-2225 carries features of AM/FM/PM/FSK/SUM Modulation, Sweep, Burst and Frequency Counter, which can be applied to various communication fields.
In addition to the intuitive and friendly user interface, the 3.5-inch color LCD displays the comprehensive operation information including the true waveform presented at the output. USB Host and Device interfaces are equipped to link the AFG-2225 with other devices, which provide the flexibility of waveform generation for more practical usages. With link to GW Instek GDS-series Digital Storage Oscilloscopes (DSOs), the waveforms of interest can be captured and reconstructed. User can also use the arbitrary waveform PC software to edit the waveform and then send to AFG-2225 directly, or save the waveform into flash drive and then transfer to AFG-2225.
Ordering Info :
|
AFG-2225 |
The specifications apply when the function generator is powered on for at least 30 minutes under +18°C~+28°C.
| AFG-2225 models | CH1 | CH2 | ||
| Waveforms | Sine, Square, Ramp, Pulse, Noise, ARB | |||
| Arbitrary Functions | ||||
| Sample Rate | 120 MSa/s | |||
| Repetition Rate | 60 MHz | |||
| Waveform Length | 4k points | |||
| Amplitude Resolution | 10 bits | |||
| Non-Volatile Memory | 4k points | |||
| Frequency Characteristics | ||||
| Range | Sine, Square | 1uHz~25MHz | ||
| Ramp | 1MHz | |||
| Resolution | 1uHz | |||
| Accuracy | Stability | ±20 ppm | ||
| Aging | ±1 ppm, per 1 year | |||
| Tolerance | ≤1 mHz | |||
| Output Characteristics | ||||
| Amplitude | Range | 1mVpp to 10 Vpp (into 50Ω) 2mVpp to 20 Vpp (open-circuit) 1mVpp to 5 Vpp (into 50Ω) for 20MHz-25MHz 2mVpp to 10 Vpp (open-circuit) for 20MHz-25MHz |
||
| Accuracy | ±2% of setting ±1 mVpp (at 1 kHz) | |||
| Resolution | 1mV or 3 digits | |||
| Flatness | ±1% (0.1dB) ≤100kHz ±3% (0.3 dB) ≤5MHz ±5% (0.4 dB) ≤12MHz ±10%(0.9dB) ≤25MHz (sine wave relative to 1kHz) |
|||
| Units | Vpp, Vrms, dBm | |||
| Offset | Range | ±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit) ±2.5 Vpk ac +dc (into 50Ω) for 20MHz-25MHz ±5Vpk ac +dc (Open circuit) for 20MHz-25MHz |
||
| Accuracy | 2% of setting + 10mV+ 0.5% of amplitude | |||
| Waveform Output | Impedance | 50Ω typical (fixed) > 10MΩ (output disabled) |
||
| Protection | Short-circuit protected Overload relay automatically disables main output |
|||
| Sine wave Characteristics | ||||
| Harmonic distortion | ≤-55 dBc DC ~ 200kHz, Ampl > 0.1Vpp ≤-50 dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp ≤-35 dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp ≤-30 dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp |
|||
| Square wave Characteristics | ||||
| Rise/Fall Time | ≤25ns at maximum output. (into 50 Ω load) | |||
| Overshoot | 5% | |||
| Asymmetry | 1% of period +5 ns | |||
| Variable Duty Cycle | 1.0% to 99.0% ≤100kHz 10% to 90% ≤ 1MHz 50% ≤ 25MHz |
|||
| Ramp Characteristics | ||||
| Linearity | < 0.1% of peak output | |||
| Variable Symmetry | 0% to 100% (0.1% Resolution) | |||
| Pulse Characteristics | ||||
| Period | 40ns~2000s | |||
| Pulse Width | 20ns~1999.9s | |||
| Overshoot | <5% | |||
| Jitter | 20ppm +10ns | |||
| AM Modulation | ||||
| Carrier Waveforms | Sine, Square, Ramp, Pulse,Arb | Sine, Square, Ramp, Pulse,Arb | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp |
Sine, Square, Triangle, Upramp, Dnramp |
||
| Modulating Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) |
2mHz to 20kHz (Int) DC to 20kHz (Ext) |
||
| Depth | 0% to 120.0% | 0% to 120.0% | ||
| Source | Internal / External | Internal / External | ||
| FM Modulation | ||||
| Carrier Waveforms | Sine, Square, Ramp, | Sine, Square, Ramp, | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp |
Sine, Square, Triangle, Upramp, Dnramp |
||
| Modulating Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) |
2mHz to 20kHz (Int) DC to 20kHz (Ext) |
||
| Peak Deviation | DC to Max Frequency | DC to Max Frequency | ||
| Source | Internal / External | Internal / External | ||
| Sweep | ||||
| Waveforms | Sine, Square, Ramp, | Sine, Square, Ramp, | ||
| Type | Linear or Logarithmic | Linear or Logarithmic | ||
| Start/Stop Freq | 1uHz to Max Frequency | 1uHz to Max Frequency | ||
| Sweep Time | 1ms to 500s | 1ms to 500s | ||
| Source | Internal / External/Manual | Internal / External/Manual | ||
| FSK | ||||
| Carrier Waveforms | Sine, Square, Ramp, Pulse | Sine, Square, Ramp, Pulse | ||
| Modulating Waveforms | 50% duty cycle square | 50% duty cycle square | ||
| Modulation Rate | 2mHz to 100 kHz (INT) DC to 100 kHz(EXT) |
2mHz to 100 kHz (INT) DC to 100 kHz(EXT) |
||
| Frequency Range | 1uHz to Max Frequency | 1uHz to Max Frequency | ||
| Source | Internal / External | Internal / External | ||
| PM | ||||
| Carrier Waveforms | Sine, Square, Ramp | Sine, Square, Ramp | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp |
Sine, Square, Triangle, Upramp, Dnramp |
||
| Modulation Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) |
2mHz to 20kHz (Int) DC to 20kHz (Ext) |
||
| Phase deviation | 0˚ to 360˚ | 0˚ to 360˚ | ||
| Source | Internal / External | Internal / External | ||
| SUM | ||||
| Carrier Waveforms | Sine, Square, Ramp, Pulse, Noise | Sine, Square, Ramp, Pulse, Noise | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp,Dnramp |
Sine, Square, Triangle, Upramp,Dnramp |
||
| Modulation Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) |
2mHz to 20kHz (Int) DC to 20kHz (Ext) |
||
| SUM Depth | 0% to 100.0% | 0% to 100.0% | ||
| Source | Internal / External | Internal / External | ||
| External Trigger Input | ||||
| Type | For FSK, Burst, Sweep | |||
| Input Level | TTL Compatibility | |||
| Slope | Rising or Falling(Selectable) | |||
| Pulse Width | >100ns | |||
| Input Impedance | 10kΩ，DC coupled | |||
| External Modulation Input | ||||
| Type | For AM, FM, PM, SUM | |||
| Voltage Range | ±5V full scale | |||
| Input Impedance | 10kΩ | |||
| Frequency | DC to 20kHz | |||
| Trigger Output | ||||
| Type | For Burst, Sweep, Arb | |||
| Level | TTL Compatible into 50Ω | |||
| Pulse Width | >450ns | |||
| Maximum Rate | 1MHz | |||
| Fan-out | ≥4 TTL Load | |||
| Impedance | 50Ω Typical | |||
| Dual Channel Function | ||||
| Phase | -180˚ ~180˚ | -180˚ ~ 180˚ | ||
| Synchronize phase | Synchronize phase | |||
| Track | CH2=CH1 | CH1=CH2 | ||
| Coupling | Frequency(Ratio or Difference) | Frequency(Ratio or Difference) | ||
| Amplitude & DC Offset | Amplitude & DC Offset | |||
| DSOlink | √ | √ | ||
| Burst | ||||
| Waveforms | Sine, Square, Ramp | Sine, Square, Ramp | ||
| Frequency | 1uHz~25MHz | 1uHz~25MHz | ||
| Burst Count | 1 to 65535 cycles or Infinite | 1 to 65535 cycles or Infinite | ||
| Start/Stop Phase | -360 to +360 | -360 to +360 | ||
| Internal Period | 1ms to 500s | 1ms to 500s | ||
| Gate Source | External Trigger | External Trigger | ||
| Trigger Source | Single, External or Internal Rate | Single, External or Internal Rate | ||
| Trigger Delay | N-Cycle, Infinite | 0s to 655350ns | 0s to 655350ns | |
| Frequency Counter | ||||
| Range | 5Hz to 150MHz | |||
| Accuracy | Time Base accuracy±1count | |||
| Time Base | ±20ppm (23˚C ±5˚C) after 30 minutes warm up | |||
| Resolution | The maximum resolution is: 100nHz for 1Hz, 0.1Hz for 100MHz. |
|||
| Input Impedance | 1kΩ/1pf | |||
| Sensitivity | 35mVrms ~ 30Vms (5Hz to 150MHz) | |||
| Save/Recall | ||||
| 10 Groups of Setting Memories | ||||
| Interface | ||||
| USB (Host & Device) | ||||
| Display | ||||
| 3.5”TFT LCD | ||||
| General Specifications | ||||
| Power Source | AC100~240V, 50~60Hz | |||
| Power Consumption | 25 W (Max) | |||
| Operating Environment | Temperature to satisfy the specification : 18 ~ 28˚C Operating temperature : 0 ~ 40˚C Relative Humidity: ＜ 80%, 0 ~ 40˚C Installation category： CAT II |
|||
| Operating Altitude | 2000 Meters | |||
| Storage Temperature | -10~70˚C, Humidity: ≤70% | |||
| Dimensions (WxHxD) | 266(W) x 107(H) x 293(D) mm | |||
| Weight | Approx. 2.5kg | |||
| Accessories | GTL-101× 2 Quick Start Guide ×1 CD (user manual + software) ×1 Power cord×1 |
|||
