The GCP-100 is a Clamp-Type Probe Designed to Measure AC and DC Current waveforms. The Current Measurement Ranges from 50mA to 100A.
Applications:
Clamp Measurement: Safe and Easy
To perform current waveform measurement, just clamp the jaw around the conductor-under-test and connect its lead to the BNC input of an oscilloscope. Breaking the circuit and connecting an ammeter in series is no longer necessary.
Current Measurement from DC to 100kHz for Various Instruments
Using the combination of a Hall-effect sensor and an AC current transformer, the GCP-100 provide accurate measurement from DC to 100kHz. The dual measurement range spans 50mA ~ 10A and 1A ~ 100A. In addition to oscilloscopes, the GCP-100 can also be connected to multimeters and data loggers.
| GW Instek GCP-100 Specifications | |
| Bandwith | DC ~ 100kHz |
| Max. Cable Dimensions | 11.8m |
| Measurement Range | 50mA ~ 10A 1A ~ 100A |
| Ratio | 1A / 100mV 1A / 10mV |
| Accuracy | ≤3% (50mA ~ 10A) ≤4% (1A ~ 100A) |
| Dimension | 231(W) x 67(H) x 36 (D) mm |
| Weight | 330g with battery |
| Jaw Opening | 12.5 mm maximum |
| Protection | Degrees of protection : IP 20 to IEC 529 Protection from shocks : 100G, 6ms, half-cycle, to IEC 6s-2-27 Drop height from all angles : 1m Resitance to vibrations : 10/55/10Hz 0.15mm to IEC 68-2-6 Bumps : 40G, 6ms, 4000bumps, to IEC 62-2-29 |
