PPH 1510D

Features

  • Dual Channel DC Power Output
  • PPH-1510D (CH1: 0~15V/0~3A or 0~9V/0~5A, 0~4.5V/0~10A(Rear terminal); CH2: 0~12V/0~3A)
  • 3.5 inch TFT LCD Display
  • Built-in DVM Measurement Function
  • High Measurement Resolution (1mV/0.1μA for 5mA Range)
  • Current Sink Function (Maximum : 3.5A)
  • Pulse Current Measurement
  • Long Integration Current Measurement
  • Sequence Function (Sequential power output)
  • Built-in Battery Simulation Function
  • OVP, OCP, OTP & Temperature Display for Heat Sink
  • Support USB (Device& Host)/GPIB/LAN
  • 5 Groups of Save/Recall Setting
  • External RELAY Control

  • Share on

PPH-15xxD high precision measurement capability achieves the maximum resolution of 1mV/0.1uA and the smallest pulse current width of 33us that satisfy customers’ measurement application requirements of high resolution and pulse current. Fast load current variation will result in voltage sag for general power supplies that will have an impact on DUT’s internal circuit operation. PPH-15xxD is equipped with the excellent transient recovery time, which can, in less than 40us, recover the output voltage to within 100mV of the previous voltage output when the current level changes from 10% to 100% of the full scale. Furthermore, conventional power supplies do not have sufficient response speed to promptly respond to set voltage value once the set voltage is changed. PPH-15xxD has a rise time of 0.2ms and a fall time of 0.3ms, which are 100 times faster than that of conventional power supplies. Therefore, PPH-15xxD can provide DUT with a stable output voltage even when DUT is operating under large transient current output. The internal high-speed sampling circuit design of PPH-15xxD, with the sample rate of 64K, can conduct pulse current measurement without using a current probe and oscilloscope. The current read back accuracy is 0.2%+1uA (equals to 11uA) at 5mA range, and the read back resolution is 0.1uA that allow DUT to be measured with a high accuracy level. Unlike battery, general power supplies, which do not have the characteristics of fast transient recovery time, can not maintain a stable power supply for cellular phone, wireless device, and wearable device which produce large transient pulse current load for hundreds of μs to dozens of ms when in use. PPH-15xxD, different from general power supplies, has the characteristics of fast transient recovery time. While simulating battery to output pulse current, PPH-15xxD can quickly compensate the voltage drop caused by pulse current. PPH-15xxD’s CH1 has the built-in battery simulation function, which can define output impedance settings so as to accurately simulate battery’s impedance characteristics during battery discharge. Fast transient recovery time and built-in battery simulation function together facilitate PPH-15xxD to accurately simulate battery’s real behavior pattern so as to conduct product tests.

Ordering Info :

PPH-1503D
High Precision Dual Channel Output DC Power Supply

PPH-1506D
High Precision Dual Channel Output DC Power Supply

PPH-1510D
High Precision Dual Channel Output DC Power Supply

Model
PPH-1506D
PPH-1510D
OUTPUT RATING
Number of output channel
2
2
Channel No
Ch1
Ch2
Ch1
Ch2
Power
45W
36W
45W
36W
Voltage
0 ~ 15V or 0 ~ 9V
0 ~ 12V
0 ~ 15V or 0 ~ 9V
0 ~ 12V
Current
0 ~ 3A or 0 ~ 5A
0~ 3.0A
0 ~ 3A or 0 ~ 5A; Rear: 0~10A(under 0~ 4.5V)
0~ 3.0A
Output Voltage Rising Time
0.20ms (10% ~ 90%)
0.20ms (10% ~ 90%)
Output Voltage Falling Time
0.30ms (90% ~ 10%)
0.30ms (90% ~ 10%)
STABILITY
Voltage
0.01%+3.0mV
0.01%+3.0mV
Current
NA
NA
REGULATION (CV)
Load
0.01%+2mV
0.01%+2mV
Line
0.5mV
0.5mV
REGULATION (CC)
Load
0.01%+1mA
0.01%+1mA
Line
0.5mA
0.5mA
RIPPLE & NOISE (20Hz ~ 20MHz
CV p-p
≦5A:8mVp-p(20Hz~ 20MHz)
≦5A:8mVp-p(20Hz~ 20MHz)
>5A: 12mVp-p(20Hz~20MHz)
CV rms
3mV(0~1MHz)
3mV(0~1MHz)
CC rms
NA
NA
PROGRAMMING ACCURACY
Voltage
0.05%+10mV
0.05%+10mV
Current (CH1: 5A,10A/CH2:1.5A,3A
0.16%+5mA(5A/3A)
0.16%+5mA(5A/3A)
Current (500mA)
0.16%+0.5mA
NA
0.16%+0.5mA
NA
Current (5mA)
0.16%+5uA
0.16%+5uA
READBACK ACCURACY
Voltage
0.05%+3mV
0.05%+3mV
Current (CH1: 5A,10A/CH2:1.5A,3A)
0.2%+400uA(5A range)
0.2%+400uA
0.2%+400uA(5A range)
0.2%+400uA
Current (500mA)
0.2%+100uA(500mA range)
NA
0.2%+100uA(500mA range)
NA
Current (5mA)
0.2%+1uA(5mA range)
0.2%+1uA
0.2%+1uA(5mA range)
0.2%+1uA
RESPONSE TIME
Transient Response Time (Response to 1000% Load Change)
< 40uS (within 100mV, Rear)
< 50uS (within 100mV, Front)
< 80uS (within 20mV)
 
< 40uS (within 100mV, Rear)
< 50uS (within 100mV, Front)
< 80uS (within 20mV)
 
PROGRAMMING RESOLUTION
Voltage
2.5mV
2.5mV
Current
1.25mA( 5A range)
1.25mA
1.25mA( 5A range)
1.25mA
Current
0.125mA(500mA range)
NA
0.125mA(500mA range)
NA
Current
1.25uA(5mA range)
1.25uA(5mA range)
READBACK RESOLUTION
Voltage
1mV
1mV
Current
0.1mA( 5A Range)
0.1mA( 3A Range)
0.1mA( 5A Range)
0.1mA( 3A Range)
Current
0.01mA ( 500mA Range)
NA
0.01mA ( 500mA Range)
NA
Current
0.1uA( 5mA Range)
0.1uA( 5mA Range)
0.1uA( 5mA Range)
0.1uA( 5mA Range)
PROTECTION FUNCTION
OVP Accuracy
CH1: 0.8V
CH2:50mV
CH1: 0.8V
CH2:50mV
OVP Resolution
10mV
10mV
10mV
10mV
DVM
DC Readback Accuracy ( 23℃± 5℃)
NA
0.05%+3mV
NA
0.05%+3mV
Readbck Resolution
1mV
1mV
Input Voltage range
0 ~ 20VDC
0 ~ 20VDC
Maximum Input Voltage
-3V, +22V
-3V, +22V
Input Resistance and Capacitance
20MΩ
20MΩ
Programmable output resistance
Range
0.001Ω to 1.000 Ω
NA
0.001Ω to 1.000 Ω
NA
Programming accuracy
0.5% + 10 mΩ
0.5% + 10 mΩ
Resolution
1mΩ
1mΩ
PULSE CURRENT MEASUREMENT
TRIGGER LEVEL
5mA ~ 5A, 5mA/step
5mA ~ 3A, 5mA/step
5mA ~ 5A, 5mA/step
5mA ~ 3A, 5mA/step
HIGH TIME/LOW
TIME/AVERAGE TIME
33.3us to 833ms, 33.3us/step
33.3us to 833ms, 33.3us/step
TRIGGER DELAY
0 ~ 100ms,10us/steps
0 ~ 100ms,10us/steps
AVERAGE READINGS
1 ~ 100
1 ~ 100
LONG INTEGRATION PULSE
TIMEOUT
1S ~ 63S
1S ~ 63S
LONG INTEGRATION
MEASUREMENT
TIME
850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO
time 16.7ms/steps(60Hz), 20ms/steps(50Hz)
850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO
time 16.7ms/steps(60Hz), 20ms/steps(50Hz)
LONG INTEGRATION TRIGGER
MODE
Rising, Falling, Neither
Rising, Falling, Neither
OTHERS
Output Terminal
Front / Rear Panel
Rear Panel
Front / Rear Panel
Rear Panel
DVM Input
NA
Front Panel
NA
Front Panel
RELAY CONTROL
CONNECTOR
150mA/15V ,5Voutput, 100mA
150mA/15V ,5Voutput, 100mA
Operation temperature
0 ~ 40°C
0 ~ 40°C
Operation Humidity
≤ 80%
≤ 80%
Storage Temperature
-20˚ C ~ 70˚ C
-20˚ C ~ 70˚ C
Storage Humidity
< 80%
< 80%
PC REMOTE INTERFACES
(Standard)
GPIB / USB / LAN
GPIB / USB / LAN
CURRENT SINK CAPACITY
Sink Current Rating
CH1:0~4V: 3.5A
4~15V:
3.5A-(0.25A/V)*(Vset-4V)
CH2: 0~ 5V: 3A
5~12V:
3A-(0.25A/V)*(Vset-5V)
CH1:0~4V: 3.5A
4~15V:
3.5A-(0.25A/V)*(Vset-4V)
CH2: 0~ 5V: 3A
5~12V:
3A-(0.25A/V)*(Vset-5V)
Memory
Save / Recall
5 Sets
5 Sets
Power
Input Power
90-264VAC ; 50/60Hz
90-264VAC ; 50/60Hz
POWER CONSUMPTION
160W
160W
DIMENSIONS & WEIGHT
Dimensions
222(W) x 86(H) x 363(D) mm
222(W) x 86(H) x 363(D) mm
Weight
Approx 4.5Kg
Approx 4.5Kg