HOME / PIE Instrument

PIE 535 Voltage Current Calibrator

Features

  • True ± 0.025% of reading
  • Read and Source 0.000 to 50.000 mA
  • Display current or -25.00 to 125.00% of 4-20mA or 10-50mA
  • Bar graph displays % of 4-20mA or 10-50 mA
  • Read 0.00 to 60.00 volts with 2X over range ability
  • Simulate 2-Wire Transmitters
  • Power 2-Wire Transmitters and Read 0.000-50.000mA
  • Read 0.00 to ± 30.00 VDC with 4X over range ability
  • Source 0.000 to 24.000 VDC with up to 20mA output
  • Direct Calibration 1.000V to 5.000V
  • Loop Compliance Voltage ≥ 43 Volts
  • OPTIONAL ANALOG OUTPUT for chart recorders & Data loggers
  • Auto Step or Ramp with HIGH accuracy and repeatability designed in collaboration with Nuclear plants
  • Selectable step sizes, time in-between steps & soak time
  • Stop watch like EZ-Check™ switch
  • Full 5 Digit Display
  • Fuseless protection from accidental connection to 240 volts AC/DC
  • Rugged handheld enclosure with optional lanyard and Velcro® hand strap
  • Uses 4 AA alkaline batteries
  • Superior battery life of 40 hours under typical continuous usage
  • Easy access to battery compartment
  • AC adaptor, carrying case, and Test Data available
  • NIST Traceable Test Data, A/C Adaptor, and Carrying Case included FREE
  • NIST Traceable Calibration Certificate included FREE

Category: Process Calibrator

Tags: PIE 535 Voltage Current Calibrator, PIE535, PIE-535, Kalibrasi, PIE Instrument, PIE Instrument Indonesia

Practical Instrument Electronics (PIE) Model 535 brings you the features of the original Model 532 for 10-50 milliamp process loops. On power up you can select 4-20 or 10–50 mA. The EZ-Dial™ knob and EZ-Check™ switch are all that’s needed to make quick adjustments or set 0% or 100% of full scale. The EZ-Step™ button provides one-handed stepping. Automatic stepping and ramping modes allow hands-free testing and calibration of the process loop with HIGH accuracy and repeatability designed in collaboration with Nuclear plants. The model 535 offers the optional analog output of 10mV/mA proportional output for connection to chart recorders and data loggers. With the Model 535, calibration is easy as PIE

General Specifications

(Unless otherwise indicated all specifications are rated from a nominal 23 °C, 70 % RH for 1 year from calibration)

Operating Temperature Range -20 to 60 °C (-5 to 140 °F)
Storage Temperature Range -30 to 60 °C (-22 to 140 °F)
Relative Humidity Range 10 % ≤RH ≤90 % (0 to 35 °C), Non-condensing
10 % ≤RH≤ 70 % (35 to 60 °C), Non-condensing
Size 7.00 X 3.30 X 2.21 inches (177.8 x 83.8 x 56.1mm)
Weight 14.0 oz (397 grams)
Battery 4 AA Alkaline, 120 VAC 50/60 Hz AC adaptor included
Miscellaneous Low battery indication with nominal 1 hour of operation left
Over-voltage protection to 120 Vrms (rated for 30 seconds) or 240 Vrms (rated for 15 seconds)
Bar graph display with 1% resolution of 4-20/10-50 mA signal scale
High contrast graphic liquid crystal display with 0.45” (11.4 mm) high digits
Model 535A Analog Output 10 mV/mA ±(0.1% + 0.04mV), 5 ppm/°C
Common Specifications for all Current Modes:
Ranges 0.000 to 24.000 mA, -25.00 to 125.00% of 4-20 mA
0.000 to 52.000 mA, -25.00 to 105.00% of 10-50 mA
Accuracy ≤ ± (0.025 % of reading + 0.004 mA)
Temperature Effect ≤ ± 50 ppm/°C of range
Resolution 0.001 mA and 0.01 %
Step/Ramp Timebase Accuracy 0.01% of 4.9152 MHz
Source/Power and Measure 2-Wire Transmitter Specifications:
Loop Compliance Voltage ≥ 43 Volts
Loop Drive Capability 1200 Ω at 20 mA/800 Ω at 50 mA for entire battery life
Miscellaneous Open loop or out of compliance conditions are indicated by appropriate error display
Battery life in:
Source mode ≥ 18 hrs at 12 mA/≥ 9 hrs at 30 mA nominal (100 W load)
Power measure ≥ 10 hrs at 12 mA/≥ 5 hrs at 30 mA nominal (100 W load)
Selectable EZ-Step(s) for Source Mode/2-Wire Transmitter Simulation:
2 to 16 selectable step settings
Step size is determined by the selected high & low ranges
Selectable time settings for stepping and soak:
STEP: 5 to 900 seconds SOAK: 0 to 900 seconds
Read mA Specifications:
Voltage Burden ≤ 2V
Overload/Current Limit Protection ≤ 24 mA (4-20 range)/ ≤ 52.5 mA (10-50 range) nominal
Battery Life ≥ 40 hours typical
2-Wire Transmitter Simulation Specifications:
Overload/Current Limit Protection ≤ 24 mA (4-20 range)/ ≤ 52.5 mA (10-50 range) nominal
Loop Voltage Limits 2-90 VDC
Miscellaneous Open loop or out of compliance conditions are indicated by appropriate error display
Battery life ≥ 40 hour typical
Selectable EZ-Step(s) for Source Mode/2-Wire Transmitter Simulation:
2 to 16 selectable step settings
Step size is determined by the selected high & low ranges
Selectable time settings for stepping and soak:
STEP: 5 to 900 seconds SOAK: 0 to 900 seconds
Read Voltage Specifications:
Range: 0.00 to 30.00 VDC (with 4X over range)
Resolutions 0.01 VDC
Temperature Effect ≤ ± 200 ppm/°C of range
Input Resistance ≥ 1 MΩ
Accuracy 0.00 to 30.00 VDC ≤ ± (0.1 % of reading ±0.1 V)
Source Voltage Specifications:
Source Range: 0.000 to 24.000 VDC
Output Resistance ≤0.3 Ω
Source Current ≥20.000 mA
Accuracy ≤±(0.025%RDG + 0.004 V) ±50ppm/°C of range
Ordering Information:
4-20/10-50 Milliamp Dual Range Loop Calibrator Model 535
Includes:
Calibration Test Data
NIST Traceable Certificate
Carrying Case
60 Hz AC adapter
50 Hz AC adapter

020-0200 (included)

020-0100 (included)

020-0101 (available upon request)

Option: 10 mV/mA analog output Model 535A

KEEP IN TOUCH

Loading...