HOME / Metrel

MI 3102H BT EurotestXE 2,5 kV

Key features

  • Predefined mini AUTOSEQUENCEs:
  • Auto TT (U, Zln, Zs, Uc);
  • Auto TN/RCD (U, Zln, Zs, Rpe);
  • Auto TN (U, Zln, Zlpe, Rpe).
  • Insulation range: wide range of insulation test voltages from 100 V to 2500 V, readings up to 20 GΩ.
  • Insulation diagnostics: polarisation Index (PI) and Dielectric Absorption Ratio (DAR) calculation.
  • Power measurements and harmonics analysis.
  • Built-in help screens for referencing on site.
  • Built-in fuse tables for automatic evaluation of the line / loop impedance result.
  • On-line voltage monitoring: monitors all 3 voltages in real-time.
  • Polarity swap: automatic polarity reversal on continuity test.
  • Trip Lock function: loop impedance test without tripping the RCD.
  • Built-in charger & rechargeable batteries: unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries.
  • RCD auto: automated RCD testing procedure.
  • Bluetooth communication with PC, Android tablets and smart phones via built-in BT.
  • PC SW EuroLink PRO for downloading of test results and report creation.
  • EuroLink Android APP, data management tool (option).

Category: Multifunction tester

Tags: MI 3102H BT EurotestXE 2,5 kV, MI 3102H, MI 3102, Metrel, alat ukur, tester, metrel indonesia

MI 3102H BT EurotestXE 2,5 kV is a multifunctional measuring instrument which apart from all the necessary functions for complete installation safety testing according to IEC/EN 61557 performs insulation resistance measurement with the test voltage up to 2,5 kV (measuring range is up to 20 GΩ) and enables diagnostic test by PI and DAR indexes calculation. Besides, the MI 3102H BT EurotestXE 2,5 kV enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement. EurotestXE 2,5 kV is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

ket Function is supported
ket Function is not supported
ket Function is optional


MI 3102H BT EurotestXE 2,5 kV






Extra Features AUTOSEQUENCE PASS/FAIL System Evaluation ket
Advanced User Interface Graphical Help Menus ket
Auto Test AUTO IT (U, Zln, Isc, Isfl, IMD) ket
AUTO TN (U, Zln, Zlpe, Rpe) ket
AUTO TN/RCD (U, Zln, Zs, Rpe) ket
AUTO TT (U, Zln, Zs, Uc) ket
Autoatic Sequence Multitest sequence ket
Main Features Voltage Frequency ket
Voltage Monitoring ket
Voltage TRMS ket
Three Phase 3-Phase system (Phase SEQUENCE) ket
Differential leakage current ket
Insulation Resistance Test Voltage 50 V ket
Test Voltage 100 V ket
Test Voltage 250 V ket
Test Voltage 500 V ket
Test Voltage 1000 V ket
Test Voltage 2500 V ket
Automatic Discharge ket
Calculation of PI ket
Calculation of DAR ket
Leakage Current Differential Leakage ket
Leakage Current (with optional Clamp) ket
AC Insulation Leakage ket
Impedance Zline L-L, L-N Ipsc - 3 Wire ket
Zloop L-PE, Ipfc - 3 Wire ket
Zs (rcd) - 3 Wire ket
Zref, ΔU% ket
Fuse Tables ket
RCD RCD type AC ket
RCD type A ket
RCD type F ket
RCD Uc ket
RCD I Ramp ket
RCD Auto ket
RCD 3-Phase ket
EV-RCD ket
MI-RCD ket
RCD-S (Selective) ket
RCD (t) ket
Earth / Ground Resistance Earth Resistance 2-wire ket
Earth Resistance 3-wire ket
Two Iron Clamps Earth Resistance
Wenner 4-wire Specific Earth Resistance
Functional Load test ket
Power Measurements Active power ket
Reactive power ket
Apparent power ket
Power factor ket
Microclimatic Measurements Illuminance
Additional Features Hand-Held Hand-Held ket
Display LCD ket
Backlight ket
PASS / FAIL Indicators PASS / FAIL Indicators ket
Mains Supply / PE Check Mains Supply / PE Check ket
Connectivity Communication Port USB ket
Built-in Bluetooth ket
Android Application ket
Communication Port RS232 - PS/2 ket
Memory Downloadable ket
Internal memory ket
Uploadable ket
Printing and scanning QR-Code Printing / Scanning
Power Supply Battery Powered ket
Rechargeable Batteries in standard delivery ket
Graphical user interface Graphical on Line Help ket
Special Accessories Battery Charger Battery Charger ket
Pasive 3-Phase Adapter Pasive 3-Phase Adapter
Active Euro Checkbox Active Euro Checkbox
Active Ring Adapter EASYswitch Active Ring Adapter EASYswitch (UK Only)
Tip Commander Tip Commander
Plug Commander Plug Commander ket
PC Software Package MESM Compatible ket
Report creation
PC Software Package ket
Professional reporting
Adapter for specific resistance ρ ρ adapter
Current Lamp DC - Current Clamp
Generator Current Clamp
AC Leakage Current Clamp
Environment measurements Lux Sensor
Connectivity accessories Smart phones scanner
Standards Applied IEC 60364 IEC 60364-6 ket
IEC 60364-4-41 ket
IEC 60755 IEC 60755 ket
IEC 61008 IEC 61008 ket
IEC 61009 IEC 61009 ket
IEC 61557 IEC 61557-1 ket
IEC 61557-2 ket
IEC 61557-3 ket
IEC 61557-4 ket
IEC 61557-5 ket
IEC 61557-6 ket
IEC 61557-7 ket
IEC 61557-10 ket
IEC 61557-12 ket
AS / NZ 3760 AS / NZ 3760 ket
AS / NZ 3018 AS / NZ 3018 ket
AS / NZ 3017 AS / NZ 3017 ket
VDE 0413 VDE 0413 ket
VDE 0100 VDE 0100 ket
HD 384 HD 384 ket
BS 7671 BS 7671 17th Edition ket