HOME / KandH

HS-2000 Hydraulic Training System

1. Improvement on trainees’ familiarization of the principles and applications of various oil pressure components.

2. Demonstration of oil-pressure loop design.

3. Training of PLC programming, including architecture, instructions and ladder diagram

Category: Automatic Control Equipment

Tags: HS-2000 Hydraulic Training System, HS2000, HS-2000, KandH, Kandh Indonesia, Automatic Control Equipment

It is well known that “Factory Automation” is an indispensable measure to reduce labor cost, improve production efficiency and achieve higher product quality. However, it is widely adopted by electronic, semiconductor, LCD and mechanical factories. In factory automation, oil pressuring” plays a very essential and critical role. 

 

The “HS-2000” is launched to offer enriched knowledge from basic oil pressure components, advanced oil-pressure loop design to PLC-based electrical control system. The trainee can prepare themselves to be a high-level automation engineer with the help of the “HS-2000” trainer system. 

PART I : Basic Hydraulic Components

  1.  Hydraulic Pump

  2.  Pressure Relief Valve

  3.  Pressure Reducing Valve

  4.  Pressure Losses from Hoses

  5.  Flow Control Valve

  6.  Line Check Valve

  7.  Pilot-Operated Check Valve

  8.  Directional Control Valves

  9.  Single-Acting Hydraulic Cylinder

10.  Double-Acting Hydraulic Cylinder

11.  Hydraulic Motor


PART I I: Basic Hydraulic Control Circuits

  1.  Pressure Regulating Circuit

  2.  Safety Circuit 

  3.  Dual Pressure Regulating Circuit 

  4.  Sequence Control Circuit (1)

  5.  Sequence Control Circuit (2)

  6.  Pressure Counterbalancing Circuit 

  7.  Pressure Reducing Circuit 

  8.  Meter-In Flow Control Circuit

  9.  Meter-Out Flow Control Circuit

10.  Bleed-Off Control Circuit

11.  Pressure Keeping Circuit

12.  Differential Circuit

13.  Synchronizing Circuit

14.  Accumulator Control Circuit

15.  Hydraulic Motor Control Circuit


PART III : Basic Electro-Hydraulic Control Circuits

  1.  Series Circuit

  2.  Parallel Circuit

  3.  Remote Control Circuit

  4.  Sequence Control Circuit (1)

  5.  Sequence Control Circuit (2)

  6.  Cushion Control Circuit

  7.  Pressure Reducing Control Circuit

  8.  Meter-In Flow Control Circuit

  9.  Meter-Out Flow Control Circuit

10.  Bleed-Off Control Circuit

11.  Two-Speed Control Circuit

12.  Differential Control Circuit

13.  Synchronous Control Circuit

14.  Pressure Keeping Control Circuit

15.  Accumulator Control Circuit

16.  Hydraulic Motor Control Circuit

17.  Pressure Switch Control Circuit


PART IV : Electro-Hydraulic Sequence Control Circuits

 

  1.  One-Cycle Cylinder Reciprocation using Pushbutton and Single-Solenoid Valve

  2.  One-Cycle Cylinder Reciprocation using Pushbuttons and Single-Solenoid Valve

  3.  One-Cycle Cylinder Reciprocation using Limit Switch and Single-Solenoid Valve

  4.  Continuous Cylinder Reciprocation using Limit Switches and Single-Solenoid Valve

  5.  One-Cycle Cylinder Reciprocation using Timer and Single-Solenoid Valve

  6.  Continuous Cylinder Reciprocation using Timer and Single-Solenoid Valve

  7.  One-Cycle Cylinder Reciprocation using Pushbuttons and Double-Solenoid Valve

  8.  One-Cycle Cylinder Reciprocation using Limit Switch and Double-Solenoid Valve

  9.  Continuous Cylinder Reciprocation using Limit Switches and Double-Solenoid Valve

10.  One-Cycle Cylinder Reciprocation using Timer Limit Switch and Double-Solenoid Valve

11.  One-Cycle Cylinder Reciprocation using Timer Limit Switches and Double-Solenoid Valve

12.  Continuous Cylinder Reciprocation using Timer Limit Switches and Double-Solenoid Valve

13.  Two-Cylinder Sequencing (A+B+B-A-) using Single-Solenoid Valves

14.  Two-Cylinder Sequencing (A+/   / B-) using Single-Solenoid Valves

15.  Two-Cylinder Sequencing (A+B+/Timing/A-B-) using Single-Solenoid Valves

16.  Two-Cylinder Sequencing (A+B+A-B-) using Double-Solenoid Valves

17.  Two-Cylinder Sequencing ( A+B+/   ) using Double-Solenoid Valves

18.  Two-Cylinder Sequencing (A+B+/Timing/A-B-) using Double-Solenoid Valves

KEEP IN TOUCH

Loading...