HOME / KandH

GES-500 Wind and Solar Hybrid System

Solar Power Generation System Manual

Ex  1  Power system of Solar cells

Ex  2  Introduction of Solar cells system

Ex  3  Conversion test of solar photovoltaic energy

Ex  4  Solar cell characteristic curve test

Ex  5  The influence of temperature on solar cell

Ex  6  Solar cells affected by different light angles curves

Ex  7  The efficiency and maximum power of solar cell

Ex  8  Solar cells generation-off-grid

Ex  9  Solar cells generation-streetlight

Ex10  Solar cells generation-grid-tie

 

Wind Power System Manual

 

Ex  1  The principle of wind power

Ex  2  Introduction of wind system

Ex  3  Wind speed experiment of a wind turbine 

Ex  4  Open circuit and loading experiment of wind turbine

Ex  5  Wind energy utilization factor of wind turbine

Ex  6  Power curve experiment of wind turbine

Ex  7  Wind power generation-off-grid

Ex  8  Wind power generation-grid-tie

 

Scenery Complementary Laboratory Manual

 

Ex  1  Wind and solar hybrid system

Ex  2  The efficiency of DC-AC inverter

Ex  3  The efficiency and Islanding effect of grid-tie inverter

Ex  4  Wind and solar hybrid system-off-grid

Ex  5  Wind and solar hybrid system-streetlight

Ex  6  Wind and solar hybrid system-grid-tied

Category: Green Energy Equipment

Tags:

GES-500 (Wind and Solar Hybrid System) is composed of Solar Panel, Battery Bank Module, MPPT Solar Charging Controller Module, DC-AC Inverter Module, Grid-tie Inverter Module, Wind Generator Set, Wind Energy Monitor Module, Three-phase Rectifier Module, Wind and Solar Hybrid Controller Module, Load Module and Meters. By means of combining all these control systems, a teaching platform for implementation of the wind power, solar power and hybrid experiments is presented. It can help students understand the theory of on-grid and off-grid solar power, wind power generation system, hybrid system and further create practical applications.

1. The software can display and store the data.

2. Using the digital meter, the user can observe the current operation status of the system.  

3. All the input and output terminals are adopting the safety plugs. Users can implement the experiments with the connecting 

    wires easily and safely. 

4. Equipped with the Polarity reverse protection to avoid the modules being damaged due to the wrong input of inverse power.

5. Adjustable light source for the sunlight intensity

6. Adjustable solar panel, simulating the situation of the sunlight irradiation from different angles

KEEP IN TOUCH

Loading...