HOME / Metrel

A 1532 EVSE adapter

Measuring functions

  • Banana socket outputs for connection to a 3-phase installation tester.
  • Voltage indicators on EVSE output.
  • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
  • Control Pilot resistance selector for simulation of electric vehicle status.
  • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
  • Type 2 Male Plug connector for connection to EVSE.
  • 6 mA EV RCD support.
  • Functional tests support*.
  • EVSE AUTO SEQUENCE® support*.
  • MESM report creation**.
  • Basic support:
    A 1532
  • Partial support:
    6 mA EV RCD
    EVSE report**
  • Full support:
    Functional test support

Technical data

  • Dimensions (w x h x l): 200 x 100 x 70 mm
  • Mass (without accessories): 0.82 kg

Category: Products

Tags: A 1532 EVSE adapter, adapter, A1532, EVSE adapter, metrel, metrel indonesia

EVSE (Electric Vehicle Supply Equipment) adapter is a special accessory intended for testing Mode 3 EV supply equipment with a type 2 connector.



Input voltage 400 V (3-phase)
Frequency 50 Hz
Test current 13 A
Proximity Pilot (PP) simulation Open circuit
13 A
20 A
32 A
63 A
Control Pilot (CP) simulation State A (not connected)
State B (connected, not charging)
State C (charging without ventilation)
State D (charging with ventilation)
State E (error - CP short to PE via diode)
Overvoltage category 300 V CAT II
Protection degree IP 40
Pollution degree 2
Protection classification Double insulation
Altitude 3000 m above sea level
Dimensions (L x W x H) 200 x 100 x 70 mm
Test lead length 0.5 m
Weight 0.82 kg
Working temperature range 0 °C … 40 °C @ 95 % RH, non-condensing
Storage temperature range -10 °C … +70 °C
Maximum storage relative humidity 90 % RH (-10 °C … +40 °C)
80 % RH (40 °C … 60 °C)