Statics observes the effect of forces on a rigid body, ignoring any possible deformations which may occur in the process. The forces are in equilibrium. In reality, forces always produce an effect in the component, such as deformation. These effects are investigated in the science of the strength of materials. The methods applied in strength of materials serve to design components so that they cannot be deformed or destroyed by applied forces.
A simple example is a statically determinate bearing-mounted beam subjected to point loads. The reactions are determined from the conditions of equilibrium. To investigate the effect of the point loads in the beam, it is notionally split into two segments. Applying the method of sections, the internal forces and moments are plotted onto the two segments and calculated by way of conditions of equilibrium.
WP 960 includes a beam mounted on two supports. The beam is cut at one point. At that point there is a low-friction hinge with two degrees of freedom. Two force gauges determine the internal reactions to the externally applied forces at the section. The shear force is recorded and displayed directly by a force gauge. The bending moment occurring at the section is recorded by a second force gauge acting on a fixed lever arm. This force readout, divided by 10, gives the bending moment in Nm.
Adjuster nuts on the two force gauges are used to align the beam horizontally and balance out any deflection.
In evaluating the experiment it becomes clear that the shear force, as opposed to the bending moment, is mostly negligible when designing components.
The various elements of the experiment are clearly laid-out and housed securely in a storage system. The complete experimental setup is arranged on a frame.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
Learning Objectives / Experiments
- calculation of the reactions arising from the static conditions of equilibrium
- application of the method of sections to calculate the internal forces and moments
* under a point load
* under multiple point loads
- calculation of the shear force diagram
- calculation of the bending moment diagram
- comparison of calculated and measured values for shear force and bending moment
 determination of shear force and bending moment on beam mounted on 2 supports
 measurement of shear force and bending moment in beam by low-friction hinge with 2 degrees of freedom
 position of hinge at 1/3 span
 2 bearing supports
 loading of beam by 1 to 3 point loads
 force gauges to indicate shear force and determine bending moment
 bending moment determined by force measurement and lever arm
 adjuster nuts for horizontal alignment of beam
 steel rule to determine positions of point loads
 storage system to house the components
- total length: 1000mm
- span: 800mm
- bending moment via force gauge and lever arm
lever arm: 100mm
Force gauge: -100...+100N
bending moment: -10...+10Nm
- shear force: -50...+50N
- steel rule: 1000mm, graduations: 1mm
- 3x 1N (hangers)
- 12x 1N
- 9x 5N
- max. load per hanger: 20N
Dimensions and Weight
Weight: approx. 35kg
LxWxH: 1170x480x178mm (storage system)
Weight: approx. 12kg (storage system)
Scope of Delivery
1 experimental unit
1 set of loads
1 steel rule
1 storage system with foam inlay
1 set of instructional material